收藏本站

ADM8839
PIN CONFIGURATION AND FUNCTION DESCRIPTIONS
V CC 1
VOUT 2
LDO_IN 3
+5VOUT 4
+5VIN 5
PIN 1
INDICATOR
ADM8839
TOP VIEW
15 C4–
14 C2+
13 C2–
12 C3+
11 C3–
Figure 2. Pin Configuration
Table 5. Pin Function Descriptions
Pin No.
1
2
3
4
5
6
7
8
9
10
11, 12
13, 14
15, 16
17
18
19, 20
Mnemonic
V CC
VOUT
LDO_IN
+5VOUT
+5VIN
LDO_ON/OFF
SHDN
V CC
GND
+15VOUT
C3?, C3+
C2?, C2+
C4?, C4+
?15VOUT
GND
C1?, C1+
Description
Positive Supply Voltage Input. Connect this pin to the 3 V supply with a 2.2 μF decoupling capacitor. Must be
electrically tied together with Pin 8 by a PCB trace.
Voltage Doubler Output. This is derived by doubling the 3 V supply. A 2.2 μF capacitor to ground is required
on this pin.
Voltage Regulator Input. The user can bypass this circuit by using the LDO_ON/OFF pin.
5 V Output. This is derived by doubling and regulating the 3 V supply. A 2.2 μF capacitor to ground is required
on this pin to stabilize the regulator.
5 V Input. This is the input to the voltage tripler and inverter charge pump circuits.
Control Logic Input. 3 V CMOS logic. A logic high selects the internal LDO for regulation of the 5 V voltage
doubler output. A logic low isolates the internal LDO from the rest of the charge pump circuits. This allows the
use of an external LDO to regulate the 5 V voltage doubler output. The output of this LDO is then fed back into
the voltage tripler and inverter circuits of the ADM8839.
Digital Input. 3 V CMOS logic. Active low shutdown control. This shuts down the timing generator and enables
the discharge circuit to dissipate the charge on the voltage outputs, thus driving them to 0 V.
Connect this pin to V CC . Must be electrically tied with Pin 1 by a PCB trace.
Connect this pin to GND. Must be electrically tied with Pin 18 by a PCB trace.
15 V Output. This is derived by tripling the 5 V regulated output. A 0.22 μF capacitor is required on this pin.
External Capacitor C3 is connected between these pins. A 0.22 μF capacitor is recommended.
External Capacitor C2 is connected between these pins. A 0.22 μF capacitor is recommended.
External Capacitor C4 is connected between these pins. A 0.22 μF capacitor is recommended.
?15 V Output. This is derived by tripling and inverting the 5 V regulated output. A 0.22 μF capacitor is required
on this pin.
Device Ground. Must be electrically tied with Pin 9 by a PCB trace.
External Capacitor C1 is connected between these pins. A 2.2 μF capacitor is recommended.
Rev. C | Page 5 of 12
发布紧急采购，3分钟左右您将得到回复。

采购需求

(若只采购一条型号，填写一行即可)

发布成功！您可以继续发布采购。也可以进入我的后台，查看报价

发布成功！您可以继续发布采购。也可以进入我的后台，查看报价

*型号 *数量 厂商 批号 封装
添加更多采购

我的联系方式

*
*
*
相关PDF资料
SP6652EB EVAL BOARD FOR SP6652
EBM10DTAH CONN EDGECARD 20POS R/A .156 SLD
R1S8-153.3/P-R CONV DC/DC 1W 15VIN 3.3VOUT
EBM10DTAD CONN EDGECARD 20POS R/A .156 SLD
SP6127EB EVAL BOARD FOR SP6127
R1S8-1524/P-R CONV DC/DC 1W 15VIN 24VOUT
R1S8-1515/P-R CONV DC/DC 1W 15VIN 15VOUT
A9CCG-0506F FLEX CABLE - AFG05G/AF05/AFG05G
相关代理商/技术参数
ADM8840 制造商:AD 制造商全称:Analog Devices 功能描述:Charge Pump Regulator & COM Driver for Color TFT Panel
ADM8840ACP 制造商:Analog Devices 功能描述:LCD DRVR 2.7V TO 3.6V 32LFCSP - Bulk
ADM8840ACP-REEL7 制造商:Analog Devices 功能描述:
ADM8843 制造商:AD 制造商全称:Analog Devices 功能描述:4 White LED Backlight Driver
ADM8843ACPZ 制造商:Analog Devices 功能描述:LED DRVR 4SEGMENT 3.3V/5V 16LFCSP EP - Bulk
ADM8843ACPZ1-R7 制造商:Analog Devices 功能描述:
ADM8843ACPZ-REEL7 功能描述:IC LED DRVR WHITE BCKLGT 16LFCSP RoHS:是 类别:集成电路 (IC) >> PMIC - LED 驱动器 系列:- 标准包装:1 系列:- 恒定电流:- 恒定电压:- 拓扑:PWM，切换式电容器（充电泵） 输出数:1 内部驱动器:是 类型 - 主要:背光 类型 - 次要:白色 LED 频率:642kHz 电源电压:2.7 V ~ 5.5 V 输出电压:5V 安装类型:表面贴装 封装/外壳:10-VFDFN 裸露焊盘 供应商设备封装:10-VSON 包装:剪切带 (CT) 工作温度:-30°C ~ 85°C 产品目录页面:1371 (CN2011-ZH PDF) 其它名称:BD1603NUV-E2CT
ADM8843ACUZ-REEL7 制造商:Analog Devices 功能描述: